DC Coil Rated Voltage JQ - 200D(B) 48 - 48AW 200 Amp DC Battery Contactor Continuous Operation Duty
1. Product summary
JQ-200D(B)/48-48BW DC contactor has a set of bridge normally opened contactors with load current up to 100A. Accord with GB1408.4-2010/IEC60947-4-1:2009 Ed.3.0.MOD, YD/T585-2010. Suitable for communication power equipment electrical control device.
2. The schematic diagram of the terminal circuit
3. Requirement of being used
| Ambient temperature: work | - 40 ~ + 60; storage and transportation: - 40 ~ + 70 |
| relative humidity | 98% at 40 |
| altitude | not more than 2000 meters |
| Vibration | 10-55hz |
| amplitude | 0.35mm |
| impact | 30m/s2 |
4. Parameter table
| Parameter | Coil voltage of contact circuit |
| Voltage range | 6-220v |
| Coil power | 5-8w |
| Normal state | Normally closed |
| Main rated load current of contact circuit | 200A |
| Rated voltage of contact circuit | 6-80v |
| Sucking time | 40ms |
| Releasing time | 30ms |
| Mechanical life | 100000times |
| Electric life | 1000times |
| Coil resistance | 603.6-708.4Ω |
4. Mark representataion
JQ-200D(B) 48 - 48AW
| JQ | DC Ccontactor |
| 200 | Rated load 200A |
| D | Normally closed |
| (B) | Communication power |
| B | Double coil |
| 48 | The contact voltage |
| 48 | The contact voltage |
| W | Bending mounting plate |
5. Standard,safty and environmental protection
Comply with GB14048.4-2003 / IEC60947-4-1:2000 low voltage switching equipment and control equipment electromechanical contactor and motor starter standard；
6. The configuration, installation and terminal
8. Current heat raise curve
9. Application range
