Shenzhen Zhenhua Qunying Electronics CO. ,Ltd.
Our purpose is to produce best products for our customers with high quality and reasonable price.
Add to Cart
Bridge Double Coil Contacts JQ - 200H 200 Ampere Series DC Motor Contactor Continuous Operation Duty For Forklift
1. Description of DC contactor
JQ-200H(B)/48-48BW DC contactor has a set of bridge normally opened contactors with load current up to 200A. Accord with GB1408.4-2010/IEC60947-4-1:2009 Ed.3.0.MOD, YD/T585-2010. Suitable for communication power equipment electrical control device.
2. Usage condition
| Ambient temperature: work | - 40 ~ + 60; storage and transportation: - 40 ~ + 70 |
| relative humidity | 98% at 40 |
| altitude | not more than 2000 meters |
| Vibration | 10-55hz |
| amplitude | 0.35mm |
| impact | 30m/s2 |
3. Order mark standard
JQ - 200H(B)/ 48 - 48BW
JQ: DC Ccontactor
200: Rated load 200A
D: Normally opened
(B): Communication power
A: Double coil
48: The contact voltage
48: The contact voltage
W: Bending mounting plate
4. Standard,safty and environmental protection
(1) Comply with GB14048.4-2003 / IEC60947-4-1:2000 low voltage switching equipment and control equipment electromechanical contactor and motor starter standard；
(2) YD/T585-2010 General credit distribution equipment technical conditions.
5. Parameter table
| Parameter | Coil voltage of contact circuit |
| Voltage range | 6-220v |
| Coil power | 5-8w |
| Normal state | Normally opened |
| Main rated load current of contact circuit | 200A |
| Rated voltage of contact circuit | 6-80v |
| Sucking time | 40ms |
| Releasing time | 30ms |
| Mechanical life | 100000times |
| Electric life | 1000times |
| Coil resistance | 603.6-708.4Ω |
6. The configuration, installation and terminal
7. Current curve
7. Main products