Shenzhen Zhenhua Qunying Electronics CO. ,Ltd.
Our purpose is to produce best products for our customers with high quality and reasonable price.
Add to Cart
JQ - 200D(B) / 48 - 48BW 200 Amp An Electrically Controlled Switch DC Power Contactor For Communication
1. Product summary
JQ-200D(B)/48-48BW DC contactor has a set of bridge normally opened contactors with load current up to 100A. Accord with GB1408.4-2010/IEC60947-4-1:2009 Ed.3.0.MOD, YD/T585-2010. Suitable for communication power equipment electrical control device.
2. Usage condition
(1) ambient temperature: work: - 40 ~ + 60; storage and transportation: - 40 ~ + 70
(2) relative humidity: 98% at 40
(3) altitude: not more than 2000 meters.
(4) vibration: 10-55hz,
(5) amplitude: 0.35mm
(6) impact: 30m/s2
3. Order mark standard
4. Standard,safty and environmental protection
(1) Comply with GB14048.4-2003 / IEC60947-4-1:2000 low voltage switching equipment and control equipment electromechanical contactor and motor starter standard；
(2) YD/T585-2010 General credit distribution equipment technical conditions.
5. JQ-200D(B)/48-48AW current curve
6. The circuit diagram of the configuration, installation and terminal
7. The schematic diagram of the terminal circuit
8. Parameter table(current actual production parameter)
| No. | requirements | unit | 24 | 48 | 54 |
| 1 | Coil resistance under 20℃ | Ω | 128.5 | 478 | 481 |
| Coil consuming resistance | W | 4.48 | 4.8 | 6 | |
| Coil resistance error | Ω | ±8% | ±8% | ||
| 2 | Action features | ||||
| Cold suction voltage:45～75%Ue | V | 10.8～15 | 21.6～29 | 24.3-33.4 | |
| Cold release voltage10%Ue～40%Ue | V | 1.8～7.2 | 3.6～15 | 5.4-21.6 | |
| Contact pressure drop of main contact | mv | ≤80 | ≤80 | ≤80 |
9. Similar Products show