Accuracy class	0.5%
Rated current in one time	5A-1000A
Rated voltage in 2 times	75mV
Environment temperature influence	Change 10℃ each, shunt output
Overload capacity	120% to rated current, continue 2h

2. Technology

(1) Surface coating: nickel plating.

(2) The surface of the resistor is coated: black amino baking enamel.

3. Specifications

1. Accuracy level :2-4000A, 0.5 level,5000-10000A, 1 level.

2. Environmental conditions: -40 ~ +60 °C, the relative temperature ≤ 95% (35 ° C)

3. Overload performance: 120% of rated current, 2 hours

4. Voltage drop: 75mV

5. Load heat: Temperature rise changes stabilized, rated current of 50A does not exceed 80 ° C; rated current of 50A does not exceed 120 ° C.

6. Pakeage included:

1 x 200A 75mV for DC Shunt Resistor

4. Material

Shunt resistor consist of manganin soldered or silver brazed to brass/copper blocks. The shunts are artificially aged after finishing and then tested on full load according to the stardand rigidly.

5. Notice

(1). Can't be touched the joint of the shunt and cable of primary circuit. Secondary voltage can't be sampled from non-sampling point.

(2). It won't be exceed 80% of rated current for long time working. A loop cable (or copper platoon) and shunt connection doesn't allow someone to contact resistance from the sampling point.

6. Outside drawing

7. Application Standards

Standards	Contents
Environmental standards	Standards for the electronic industry of the People's Republic of China: SJ/T 11363-2006 quantity requirements. Eu: ROHS.
Tolerance standard	The tolerance size is not specified in accordance with the national standard for Chinese migrant workers and the national standard: GB/ t1804-2000 rough C execution of general tolerances for linear and angular dimensions without tolerance.
Product standard	National standard of the People's Republic of China: GB/ t766-1998 direct action simulation indicator electrical measuring instruments and their accessories professional standard of the People's Republic of China: JB/ t9288-1999 external attachment diverter.
Safety standards	IEC61010-1:190 safety requirements for measuring, controlling and laboratory electrical equipment. Part 1: general requirements.

8. Analogue products presentation

Inquiry Cart 0