DC Current Shunt Circuit Types Of Resistor FL2-F 200A For Digital Amp meter Analog
1. Basic tolerance grade dimensions section
2. Technology
Surface coating: nickel plating.
The surface of the resistor is coated: black amino baking enamel.
3. Application Standards
| Standards | Contents |
| Environmental standards | Standards for the electronic industry of the People's Republic of China: SJ/T 11363-2006 quantity requirements. Eu: ROHS. |
| Tolerance standard | The tolerance size is not specified in accordance with the national standard for Chinese migrant workers and the national standard: GB/ t1804-2000 rough C execution of general tolerances for linear and angular dimensions without tolerance. |
| Product standard | National standard of the People's Republic of China: GB/ t766-1998 direct action simulation indicator electrical measuring instruments and their accessories professional standard of the People's Republic of China: JB/ t9288-1999 external attachment diverter. |
| Safety standards | IEC61010-1:190 safety requirements for measuring, controlling and laboratory electrical equipment. Part 1: general requirements. |
4. Notice
(1). Can't be touched the joint of the shunt and cable of primary circuit. Secondary voltage can't be sampled from non-sampling point.
(2). It won't be exceed 80% of rated current for long time working. A loop cable (or copper platoon) and shunt connection doesn't allow someone to contact resistance from the sampling point.
5. Material
Shunt resistor consist of manganin soldered or silver brazed to brass/copper blocks. The shunts are artificially aged after finishing and then tested on full load according to the stardand rigidly.
6. What's the shunt resistor?
A shunt is a precision resistor that can pass a large current. When current flows through the shunt, a millivolt-level voltage appears across it, which is measured with a millivolt voltmeter. This voltage, and then converted to the current voltage, complete the measurement of large currents.
The fixed setpoint shunt is a suitable the attached external shunt for measuring for DC current in 10kA less directly acting on the analog display instrument together with the use in order to expand the scope of the for DC current measurement, or sequentially circuit can be regarded as the current sampling with the standard resistors, a sampling voltage is measured with a current can be regarded as an analog signal.
7. Products presentation
